Master Spas Series Owner's Manual page 47

SPA - CONTROLS: SYSTEM-RELATED MESSAGES
TS 6.1 • TS 67.15 • TS 7.1 • TS 7.15
MEMORY FAILURE - CHECKSUM ERROR*
At Power-Up, the system has failed the Program Checksum Test. This indicates a problem
with the firmware (operation program) and requires a service call.
MEMORY FAILURE - PERSISTENT MEMORY ERROR*
Contact your dealer or service organization if this message appears on more than one
power-up.
MEMORY FAILURE - CLOCK ERROR*
Contact your dealer or service organization.
CONFIGURATION ERROR – SPA WILL NOT START UP
Contact your dealer or service organization.
A PUMP APPEARS TO BE STUCK ON
Water may be overheated. POWER DOWN THE SPA. DO NOT ENTER THE WATER. Contact
your dealer or service organization.
A PUMP APPEARS TO HAVE BEEN STUCK ON WHEN SPA WAS LAST POWERED
POWER DOWN THE SPA. DO NOT ENTER THE WATER. Contact your dealer or service
organization.
* This message can be reset from the topside panel with any button press.
45