Adapter And Battery Information - Uniden D1780-BT Series User Manual

D1780-bt series
Hide thumbs Also See for D1780-BT Series:
Table of Contents

Advertisement

Resetting Handsets
If you have trouble with a handset
or if you want to replace one, clear
the registration information from
the base and the handset:
1. Press & hold
END/ClEaR
the same time until you see the
System
Reset menu.
2. If you still have the base the
handset is registered to, select
Deregister
HS, then select the
handset you want to reset. If you
don't have that base anymore,
select Base
Unavailable.
3. To confirm, select Yes. The
handset displays Handset not
registered.
Registering Handsets
If you see a "not registered"
message on a handset, you must
register it to a base before using it.
1. Place the handset in the base;
the display should say Handset
Registering.
2. Wait until the display says
Registration
Complete (about
30 seconds), then pick up the
handset and press
3. If you don't hear a dial tone or
the display says Registration
Failed, charge the battery
completely, then try again.
# at
and
.
hoME/Flash
Adapter and Battery
Information
AC adapter
Part number
Input voltage
Output voltage
x Use only the supplied AC adapters.
x Use the proper adapter for the base &
any chargers.
x Do not place the unit in direct sunlight
or subject it to high temperatures.
Battery pack (with normal use)
Part number
Capacity
Talk time
Standby time
Battery life
x Replace the battery when the talk or
standby time becomes noticeably re-
duced. For replacements, call the Parts
Department (see the front cover).
x When the battery gets low, the handset
beeps and shows a low battery alert;
put the handset in the cradle for
recharging.
Rechargeable Battery Warning
x This equipment contains a recharge-
able Nickel-Metal-Hydride (Ni-MH)
battery.
x Nickel is a chemical known to the state
of California to cause cancer.
x Do not short-circuit the battery.
x The batteries in this equipment may
explode if disposed of in a fire.
x Do not charge the batteries in any
charger other than the one specified
in the owner's manual. Using another
PS-0034
120V AC, 60 Hz
7.8V AC @ 450mA
BT-1025
400mAh, 2.4V DC
about 7 hours
about 7 days
about 1 year
English - 23

Advertisement

Table of Contents
loading

Table of Contents