Electrolux ESF 2410 Instruction Book page 10

In the event of a fault
With help of the sound signals and flashing lamps on the panel, it's possible that you can solve the problem yourself.
When the problem is solved, press in the button for the disrupted programme and the programme continues.
In the case of other fault messages:
• Interrupt the dishwashing cycle.
• Switch the dishwasher off.
• Select the relevant programme again.
If the problem occurs again, contact your local service centre, stating the fault message.
Fault
The indicator lamps for the selected
programme and for the ended pro-
gramme cycle is flashing and 1 short
warning signal is emitted:
(Problems with the water supply).
The indicator lamps for the selected
programme and for the ended pro-
gramme cycle is flashing and 2 short
warning signals are emitted:
(Problems with water drainage).
Check
• Is the water tap turned on?
• Is the filter inside the inlet hose blocked?
• Is the water inlet hose kinked or squashed?
• Are the filters clogged?
• Is the spigot blocked?
• Is the water drain hose kinked or nipped?
• Are the filters clogged?
- 10 -