What To Do If - Electrolux EBKGL6X User Manual

22 www.electrolux.com

WHAT TO DO IF...

WARNING!
Refer to "Safety information" chap-
ter.
The appliance does not
heat up.
The appliance does not
heat up.
The appliance does not
heat up.
The appliance does not
heat up.
The appliance does not
heat up.
The lamp does not oper-
ate.
The display shows an er-
ror code that is not in this
list.
The appliance is activated
and does not heat up. The
fan does not operate. The
display shows "Demo".
If you cannot find a solution to the problem
yourself, contact your dealer or the service
centre.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Problem Possible cause
The appliance is deactiva-
ted.
The time of day is not set.
The necessary settings are
not set.
The automatic switch-off
is activated.
The fuse is released.
The lamp is defective.
There is an electronic fault. • Deactivate the appli-
The test mode is activa-
ted.
The necessary data for the service centre is
on the rating plate. The rating plate is on
the front frame of the appliance cavity.
Solution
Activate the appliance.
Set the clock. Refer to
"First setting the time of
day".
Make sure that the set-
tings are correct.
Refer to „Automatic
switch-off".
Make sure that the fuse is
the cause for the malfunc-
tion. If the fuse releases
again and again, refer to
an authorized electrician.
Replace the lamp.
ance with the house
fuse or the safety switch
in the fuse box and acti-
vate it again.
• If the display shows the
error code again, refer
to the Service Center.
1. Deactivate the appli-
ance.
2.
Touch and hold
until the appliance ac-
tivates and deacti-
vates.
3.
Touch and hold
and at the same
time until an acoustic
signal sounds and
"Demo" goes out.
.........................................
.........................................