Table of Contents
Advertisement
12 www.electrolux.com
CLOCK FUNCTIONS
SYM-
BOL
COUNT UP TIMER
Use the Count Up Timer to monitor how
long the appliance operates. It starts to
count when the appliance starts to heat.
Reset the Count Up Timer: Touch
and
at the same time until the display
shows "00:00" and the Count Up Timer
starts to count up again.
You cannot use Count Up Timer
when Duration or End is set.
SETTING THE DURATION
1.
Activate the appliance and set a heat-
ing function and temperature.
2.
Touch
play shows
flashes in the display.
3.
Touch
DURATION.
4.
Touch
5.
Touch
DURATION.
If you touch
hours for DURATION, the appli-
ance goes to the END function set-
ting.
6.
When the set time ends, an acoustic
signal sounds for two minutes.
and the time setting flash in the dis-
play. The appliance deactivates.
Touch a sensor field to stop the acous-
tic signal.
7.
Deactivate the appliance.
FUNCTION
DESCRIPTION
TIME OF DAY
To show the time of day. To change the time of day, re-
fer to 'Setting the time of day'.
DURATION
To set how long the appliance operates.
END
To set when the appliance deactivates. You can use Du-
ration and End at the same time (Time delay) if you want
the appliance to activate and deactivate automatically
later.
again and again until the dis-
.
or
to set the minutes for
to confirm.
or
to set the hours for
while you set the
SETTING THE END
1.
Activate the appliance and set a heat-
ing function and temperature.
2.
Touch
again and again until the dis-
play shows
.
flashes in the display.
3.
Touch
or
set the minutes and then the hours)
and
to confirm.
4.
When the set time ends, an acoustic
signal sounds for two minutes.
and the time setting flash in the dis-
play. The appliance deactivates.
5.
Touch a sensor field to stop the acous-
tic signal.
6.
Deactivate the appliance.
SETTING THE MINUTE MINDER
Use the MINUTE MINDER to set a count-
down (maximum h min). This function has
no effect on the operation of the appliance.
You can set the MINUTE MINDER at any
time and also when the appliance is off.
1.
Touch
.
and "00" flash in the display.
2.
Use
or
to set the MINUTE
MINDER. First you set the seconds
and then minutes and hours.
3.
Touch
and
reset the set time.
4.
Touch
or the MINUTE MINDER
starts automatically after five seconds.
5.
When set time ends, an acoustic signal
sounds for two minutes. "00:00" and
flash in the display.
to set END (first you
at the same time to
Advertisement
Table of Contents
