Table of Contents
Advertisement
BEFORE FIRST USE
WARNING!
Refer to "Safety information" chap-
ter.
INITIAL CLEANING AND
PREHEATING
• Remove all parts from the appliance.
• Clean the appliance before first use.
• Heat up the empty appliance at 150°C
for 30 minutes with
Refer to chapter "Care and Clean-
ing".
FIRST CONNECTION TO THE
MAINS
After first connection to the mains all sym-
bols in the display are on for some sec-
onds. For the subsequent few seconds the
display shows software version.
FIRST SETTING THE TIME OF
DAY
After the software version goes off, the dis-
play shows "h" and "12:00".
Setting the time of day:
1.
Touch
2.
Touch
3.
Touch
4.
Touch
The Temperature / Time display shows
new time.
Changing the time of day
You can change the time of day only if the
appliance is off.
Touch
new time of day use the above procedure.
or
or
to set hours.
.
or
to set minutes.
or
.
.
flashes in the display. To set
function
ENGLISH
7
Advertisement
Table of Contents
