Table of Contents
Advertisement
45°
LAMP
WARNING!
There is a risk of electrical shock.
The lamp and the lamp glass cover
can be hot.
Before you change the lamp:
• Deactivate the appliance.
• Remove the fuses from the fuse box or
deactivate the circuit breaker.
CAUTION!
Put a cloth on the bottom of the in-
terior of the appliance. It prevents
damage to the lamp glass cover
and the cavity.
Always use the same lamp type.
Replacing the top lamp:
1.
You can find the lamp glass cover at
the cavity ceiling.
Turn the lamp glass cover clockwise to
remove it.
2.
Clean the glass cover.
3.
If necessary, replace the oven lamp
with applicable 300 °C heat-resistant
oven lamp.
4.
Install the glass cover.
Replacing the side lamp
1.
Remove the left shelf support to get
access to the lamp.
2.
Use a narrow, blunt object (e.g. a tea-
spoon) to remove the glass cover.
Clean the glass cover.
3.
Close the door until it is at an angle of
approximately 45°.
4.
Hold the door with one hand on each
side and pull it away from the appli-
ance at an upwards angle.
Put the door with the outer side
down on a soft and level surface to
prevent scratches.
Installing the door
To install the door do the above steps in
the opposite sequence.
3.
If necessary, replace the lamp with an
applicable 300 °C heat-resistant lamp.
4.
Install the glass cover.
5.
Install the shelf support.
ENGLISH
21
Advertisement
Table of Contents
