Set In-Call Display - Motorola TIMEPORT User Manual

Set In-Call Display

This feature allows you to specify whether the time or charge
meters are displayed during a call. If you do not have the Advice
of Charge service, then only the time meter is available.
AIf a total charge limit has been set, then the in-call display
always shows your remaining credit.
Show Time Per Call
This option is used to display the time meter during calls. If you
receive the Advice of Charge service, only the chargeable calls
will be displayed.
Show Charge Per Call, Show Total Call Charges
AThese menu items are only available if you receive the
Advice of Charge service.
These options are used to display the call charges meter during
and after chargeable calls. The meter shows phone units or
currency depending on the setting of the
option.
No In-Call Display
This option switches off in-call display of the charge/time meter.
Call Charge Settings
This feature allows you to customize your Advice of Charge
settings. You will be prompted to enter your PIN2 security code
before you can access the options.
AThis menu item is only available if you receive the Advice of
Charge service.
86
Using the Options Menu
Reset Call Charges
This option resets your charge meters to zero.
Set Total Charge Limit
This option sets the maximum limit for call charges; once this limit
has been reached, the network will refuse any further chargeable
calls.
If you switch the charge limit
new limit. Enter the amount as either units or currency,
depending on the setting of the
must be entered as whole numbers.
AWhen the charge limit is
Once a limit is set, the in-call display will show the remaining
credit. When you reach your last two minutes, the warning
message
warning alert will sound. The sound will be repeated when one
Set Charge Type
minute remains. When the limit is reached the message
Limit Reached
make any more chargeable calls.
Once the limit is reached the Total Charge Limit will need to be
reset or switched off before any chargeable calls can be made.
Select
On , you will be prompted to enter a
Set Charge Type
, you will not be able to make
On
fax or data calls.
Approaching Charge Limit
will be displayed and you will not be able to
Off to switch off the charge limit.
option. Units
will be displayed and a
Charge