Motorola TIMEPORT User Manual page 39

As an alternative, you can also assign a key using the Quick
Access key (E). See "Using the Quick Access Menu" on
page 91.
Add or Edit Voice Tag
Select this option to add a Voice Tag to the quick access feature
or to overwrite an existing Voice Tag.
If you attempt to add another Voice Tag when there are already 9
quick access voice tags in your phone,
Full appears and your phone returns you to the Quick Access
feature list. You must delete a Voice Tag before you can add
another.
If there are Voice Tags available, your phone prompts you to:
1 u
Press OK When Ready
Press O to continue.
2 Say Name After Tone...
Wait for the tone to finish and then say the name. For best
results, use in an area with minimal wind or background noise.
3 u
Press OK When Ready
Press O to continue.
4 Say Name After Tone...
Wait for the tone to finish and then say the name as you did in
step 2. For best results, use in an area with minimal wind or
background noise.
5 If the recording is successful,
seconds followed by y
Voice Tag Stored
36
Using Voice Features
Voice Tag Storage
Please Wait appears after two
.
When a Voice Tag recording is successful, your phone returns you
to the Quick Access feature list.
If the recording is not successful, for example, the name you used
is similar to another Voice Tag name, the phone displays the
reason for not accepting the name and returns you to the
u Press OK When Ready prompt.
Delete Voice Tag
AThis option does not appear if there is no Voice Tag to
delete.
Select this option to delete the Voice Tag from the quick access
feature.
When you press O, the phone deletes the Voice Tag and
returns the prompt y
Voice Tag Deleted .