Motorola TIMEPORT User Manual page 58

Add or Edit Voice Tag and Delete Voice Tag
Use these options to add, edit or delete the Voice Tag for the
Phone Book entry. See "Using Voice Control" on page 33.
Add Entry
i Press E. Select the Quick Access feature or, after the
tone, say the Voice Tag name.
This option is used to add (store) entries to the Phone Book. You
can choose to add the new entry to either the phone or SIM card
memory locations.
Add To Phone Memory, Add To SIM Card Memory
Once you have selected the destination of the new entry, you will
be asked to enter the telephone number, name and location
number of the new entry.
The last telephone number displayed will be presented by default;
it can be used or discarded as required.
If the entered location is not valid, a timed message
YYY-ZZZ will be displayed and the phone will return to the
Enter Location prompt. If the chosen location is currently used
by another entry, you will be asked for confirmation that the
location can be overwritten.
If you do not supply a location number, the next available
location will be used.
When the new entry has been entered, a timed message
Stored XXX will be displayed.
Add Voice Tag
If you add a Phone Book entry to the phone memory, the
Voice Tag?
add a Voice Tag. See "Using Voice Control" on page 33.
Check Capacity
This option is used to check the number of free Phone Book
entries in the phone or SIM card memory areas.
Check Phone Capacity, Check SIM Capacity
Once selected, a timed message
the requested information.
Prevent Access
This option enables you to prevent access to the Personal
Numbers list.
AYou cannot record a Voice Tag if you have set Prevent
Access To Phone Memory.
To SIM Card Memory, To Phone Memory, To Phone & SIM
Memory, No Memory Restrictions
Range
You can prevent access to all entries in the SIM card memory, the
phone memory or both the phone and SIM card memory. To
cancel all access restrictions, use the
option.
When you change the restrictions, you will be requested to enter
the Security Code before the change is made.
prompt appears after Stored XXX
XX Unused Locations
No Memory Restrictions
Using the Options Menu
Add
. Press O to
displays
55