Motorola TIMEPORT User Manual page 88

Show Call Charges
This feature allows you to display the cost of your calls or the
amount of credit remaining. The figures are in phone units or
currency depending on the setting of the
option.
AShow Call Charges is only available if you receive the Advice
of Charge service.
Show Last Call
i Press E. Select the Quick Access feature or, after the
tone, say the Voice Tag name.
Displays the cost of your last chargeable call.
Total For All Calls
Displays the cost of all your chargeable calls since the charge
meters were reset to zero using the
option.
Credit Remaining
i Press E. Select the Quick Access feature or, after the
tone, say the Voice Tag name.
Displays the difference between your total call costs and the limit
specified by the Set Total Charge Limit
limit, No Charge Limit will be displayed.
Set Charge Type
Reset Call Charges
option. If there is no
Show Call Timers
This feature allows you to display the duration of your calls and to
reset your time meters to zero.
If you receive the Advice of Charge service, then all calls are
timed. If you do not receive the Advice of Charge service then,
depending on the model, either all calls or only outgoing calls are
timed.
Show Last Call
i Press E. Select the Quick Access feature or, after the
tone, say the Voice Tag name.
Displays the duration of your last call.
Total For All Calls
Displays the duration of all your calls since the time meter was
reset to zero using the Reset All Timers
Reset All Timers
Sets the resettable time meters to zero. The Lifetime Meter is not
resettable.
j
Set Audible Call Timers
Your phone provides two programmable audible call timers:
• The Single Alert Timer will sound a beep just once during a
call, after a preset time has elapsed.
• The Repetitive Timer will sound regular beeps during a call, at
preset intervals.
In both cases, the timers will sound their beeps ten seconds
before the end of the programmed time.
Using the Options Menu
option.
85