Table of Contents
Advertisement
1745
Users Manual
Logging Function Parameters
Logging Values
Voltage L1 or A, L2 or B, L3 or C: phase-phase or phase-neutral:
Voltage (mean, max, min values)
Voltage harmonics 1
THDV (harmonic contents of voltage)
Interharmonics 5 to 2500 Hz (in steps of 0.5 Hz) (Logging Function A
only)
Flicker P
Unbalance
Signaling voltages
Frequency
Voltage events (dips, swells, interruptions)
Current L1 or A, L2 or B, L3 or C, and N:
Current (mean, max values)
Harmonics of phase and neutral currents up to 50
Function A only)
Crest factor and peak values of the currents
Power:
Active power P (mean, min, and max values)
Absolute values active power |P| (mean, min, and max values)
Distorting power D (mean, min, and max values)
Apparent power S (mean, min, and max values)
Power Factor PF, tangent
Energy per averaging interval
Total power:
Total power P, |P|, D, S
3-wattmeter method
2-wattmeter method (Aron circuitry)
2 ½ wattmeter method
Shop for Fluke products online at:
50
st
to 50
,P
st
lt
MyFlukeStore
www.
th
order (Logging Function A only)
th
order (Logging
1.877.766.5412
.com
Advertisement
Table of Contents
