Select And Start A Washing Programme - Electrolux ESF 67060 User Manual

10 electrolux

SELECT AND START A WASHING PROGRAMME

Select and start a washing programme
without delay start
1. Open the door.
2. Switch on the appliance.
3. Make sure that the appliance is in set-
ting mode.
4. Select a washing programme. Refer to
'Washing programmes'.
– The related programme indicator light
comes on.
– All other programme indicator lights
go off.
– The programme duration flashes in
the display.
5. Close the appliance door. The washing
programme starts automatically.
You can select the washing pro-
gramme also with the door closed.
When you press a programme button,
you have only 3 seconds to select a dif-
ferent washing programme. After these
3 seconds, the washing programme
start automatically.
Select and start a washing programme
with delay start
1. Open the door.
2. Switch on the appliance and select a
washing programme.
3. Press the delay start button again and
again until the display shows the neces-
sary number of hours for the delay start.
4. Close the appliance door.
– The countdown starts automatically.
– When the countdown is completed,
the washing programme starts auto-
matically.
The opening of the appliance door inter-
rupts the countdown. When you close
the door, the countdown continues
from the point of interruption.
You can select the delay start also with
the door closed. When you select a
washing programme, you have only 3
seconds to select the delay start. After
these 3 seconds, the washing pro-
gramme starts automatically.
Interruption of a washing programme
• Open the appliance door.
– The washing programme stops.
• Close the appliance door.
– The washing programme continues
from the point of interruption.
How to cancel a washing programme
or a delay start
If a washing programme or a delay
start has not started, you can change
the selection.
When a washing programme or a delay
start are in progress, it is not possible
to change the selection. It is necessary
to cancel the washing programme or
the delay start to make a new selection.
When you cancel the delay start, this au-
tomatically cancels the selected wash-
ing programme. You have to select the
washing programme again.
1. Press and hold the cancel button until
all the programme indicator lights come
on.
2. Make sure that there is detergent in the
detergent dispenser before you start a
new washing programme.
At the end of the washing programme
• The appliance stops automatically.
• The display shows 0.
1. Switch off the appliance.
2. Open the appliance door.
3. For better drying results, keep the door
ajar for some minutes.
• If you do not switch off the appli-
ance, after three minutes from the
end of the washing programme:
– all indicator lights go off,
– the display shows one horizontal
bar,
This helps to decrease energy con-
sumption.
Press one of the buttons (not the on/off
button), the display and the indicator
lights come on again.
Auto Off
The Auto Off function automatically
switches off the appliance 10 minutes after
the end of the washing programme.
This helps to decrease energy consumption.