Where To Install - Electrolux Swissline GL EWF 1182 User Information

7.Open the porthole and remove the poly-
styrene block fitted with the adhesive
tape on the door seal.
8.Fill the smaller upper hole and the two
large ones with the corresponding plas-
tic plug caps supplied in the bag con-
taining the instruction booklet.
Important!
All the different plug caps are supplied
with the appliance in the plastic bag con-
taining the instruction booklet.
Connect the water inlet hose as de-
scribed under the paragraph "Water in-
let".

Where to install

Important! The appliance must not be used in a room where there is a dan-
ger of frost. Frost damage or impaired operation! Frost damage is not cov-
ered by the warranty.
• The surface on which the appliance is to be installed must be firm and lev-
el. Do not install the appliance on carpets or on soft floor coverings.
• The surface on which the appliance is to be installed must be clean and
dry and free from coverings that move, so that the appliance does not
slide.
• If the location in which the appliance is to be installed is fitted with small-
format tiles, put a rubber mat (available in the shops) under the appliance.
29