Tone - Marantz NR1504 Owner's Manual

Contents
2 Center Width
Distributes the dialogue output from the center channel to left and right
channels and widens the sound image in the front.
0 – 7 (Default : 3)
%
• You can set this when the sound mode is Dolby PLg in the "Music" mode.
• The smaller the value, the more dialogue is concentrated on the center
channel. The larger the value, the more dialogue is distributed to front left and
right channels, and the more the sound image widens in the front.
2 Set Defaults
The "Surr.Parameter" settings are returned to the default settings.
Front panel Display
Connections Playback
Rear panel
Settings

Tone

Adjust the tonal quality of the sound.
2 Tone Control
Set the tone control function to on/off.
On : Allow tone adjustment (bass, treble).
Off (Default) : Playback without tone adjustment.
2 Bass
Adjust bass.
–6dB – +6dB (Default : 0dB)
2 Treble
Adjust treble.
–6dB – +6dB (Default : 0dB)
%
• This cannot be set when the sound mode is set to "DIRECT" or "PURE
DIRECT".
123
Remote
Tips Appendix
Index