Video; Hdmi Setup - Marantz NR1504 Owner's Manual

Contents

Video

Make video-related settings.

HDMI Setup

Make settings for HDMI video/audio output.
NOTE
• When "HDMI PassThrough" and "HDMI Control" is set to "On", it consumes
more standby power. If you are not using this unit for an extended period, it is
recommended that you unplug the power cord from the power outlet.
2 Auto Lip Sync
Make automatic compensation for timing shift in audio and video
output.
On (Default) : Compensated.
Off : Not compensated.
2 HDMI Audio Out
Select HDMI audio output device.
AVR (Default) : Play back through speakers connected to the unit.
TV : Play back through TV connected to the unit.
%
• When the HDMI control function is activated, priority is given to the TV audio
setting (vpage 104 "HDMI control function").
• When the power of this unit is on and "HDMI Audio Out" is set to "TV",
audio is output as 2-channel from the HDMI OUT connector.
Front panel Display
Connections Playback
Rear panel
Settings
2 HDMI PassThrough
Selects how the AV receiver will pass HDMI signals to the HDMI
output in standby power mode.
On : Passes the selected HDMI input through the AV receiver's HDMI
output when the AV receiver is in standby power mode.
Off (Default) : No HDMI signals are passed through the AV receiver's
HDMI output in standby power mode.
2 HDMI Control
You can link operations with devices connected to HDMI and
compatible with HDMI Control.
On : Use HDMI control function.
Off (Default) : Do not use HDMI control function.
%
• Please consult the operating instructions for each connected device to check
the settings.
• Refer to "HDMI control function" (vpage 104) for more information about
the HDMI control function.
NOTE
• If the "HDMI Control" settings have been changed, always reset the power
to connected devices after the change.
129
Remote
Tips Appendix
Index