Marantz NR1504 Owner's Manual page 115

Contents
2 Speakers
Setting items
Audyssey ® Setup
Manual Setup
Speaker Config.
Distances
Levels
Crossovers
Bass
2 Network
Setting items
Information
IP Control
Friendly Name
Settings
Diagnostics
Maintenance Mode
Front panel Display
Connections Playback
The acoustic characteristics of the connected speakers and listening room are measured and the optimum
settings are made automatically.
Perform when setting the speakers manually or when changing settings made in Audyssey® Setup.
Indicate speaker presence and select speaker size categories based on bass reproduction capability.
Set distance from listening position to speakers.
Set the volume of the test tone to be the same when it is output from each speaker.
Set the maximum frequency of the bass signal output from each channel to the subwoofer.
Set subwoofer and LFE signal range playback.
Display network information.
Enables network communication in standby power mode.
The Friendly Name is the name of this unit displayed on the network. You can change the Friendly Name
according to your preferences.
Make settings for wired LAN.
Used to check the network connection.
Use when receiving maintenance from a Marantz service engineer or custom installer.
Rear panel
Settings
Description
Description
115
Remote
Tips Appendix
Page
Page
Index
136
145
145
146
146
147
148
149
149
149
150
151
152