Safety Information Connect Electricity - GE GSL25JFTABS Manual

WARNING!
HOW TO CONNECT ELECTRICITY
Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. For
personal safety, this appliance must be properly grounded.
INSURE PROPER GROUND
EXISTS BEFORE USE
■
■
The refrigerator should always be plugged into its own
individual electrical outlet which has a voltage rating that
matches the rating plate.
■
■
This provides the best performance and also prevents
overloading house wiring circuits which could cause a
fire hazard from overheated wires.
■
■
Never unplug your refrigerator by pulling on the power
cord. Always grip plug firmly and pull straight out from
the outlet.
READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY.
SAVE THESE INSTRUCTIONS
■
■
The power cord of this appliance is equipped with a 3-prong (grounding) plug
which mates with a standard 3-prong (grounding) wall outlet to minimize the
possibility of electric shock hazard from this appliance.
■
■
Have the wall outlet and circuit checked by a qualified electrician to make sure the
outlet is properly grounded.
■
■
If the outlet is a standard 2-prong outlet, it is your personal responsibility and
obligation to have it replaced with a properly grounded 3-prong wall outlet.
■
■
Repair or replace immediately all power cords that have
become frayed or otherwise damaged. Do not use a cord
that shows cracks or abrasion damage along its length or
at either end.
■
■
When moving the refrigerator away from the
wall, be careful not to roll over or damage the
power cord.
GEAppliances.com
3