Philips SUP 037DR Operating Instructions Manual page 21

• The icon indicates that the water tank
must be rinsed and fi lled.
Rinse the water tank thoroughly
and fi ll it again with fresh drinking
Red
water up to the MAX level.
If the water tank is not fi lled
up to the MAX level during
descaling cycle phases, the machine
could prompt to dispense more water.
• When inserting the water tank again
in the machine, the icon on the side is
displayed. Press the "
quit the descaling cycle.
Red
The machine automatically
restarts performing the operations
required for a correct start-up; at
the end of this process, products
can be brewed.
• Remove the descaling liquids from the
drip tray.
The descaling solution is to
be disposed of according
to the manufacturer's instructions
and/or the regulations in force in the
country of use.
A f t e r c o m p l e t i n g t h e
descaling cycle, wash the
brew group as described in the "Brew
Group" section in the "Cleaning and
Maintenance" chapter.
Reassemble the external part of the
Pannarello (if any).
" button to
Desc aling c ycle is now
complete and the machine
can be used to brew products.
Note: at the end of the
descaling cycle, the "Intenza"
fi lter (removed from the water tank
at the beginning of the cycle) can be
installed back.
After installing the filter, before
brewing coffee, dispense a cup of
water using the hot water function
(see section "Hot Water Dispensing").
If a new "Intenza" fi lter is installed
perform the procedure described in
the section "INTENZA Water Filter".
• 21 •