Philips SUP 037DR Operating Instructions Manual page 18

DESCALING
Limescale normally builds up with the use
of the appliance.
The display informs you when descaling
is necessary:
Orange
Do not turn the machine off
or put it in stand-by mode
during the descaling process.
Use the Saeco descaling
product only. Its formula
has been designed to ensure better
performance and operation for the
machine's entire working life. A
correct use of the solution also avoids
alterations in the brewed product.
Warning! Never drink the
descaling solution or any
products dispensed until the cycle
is complete. Never use vinegar as a
descaling solution.
Before descaling the machine, perform
the following operations:
- remove the Pannarello (if supplied)
from the steam wand as described
in the "Cleaning and Maintenance"
chapter;
- empty the drip tray. Place it back in the
machine before proceeding.
• Place a large container under the
dispensing spout.
• 18 • • 18 •
• If the machine is off, turn it on by
pressing the ON/OFF button. Wait for
the machine to complete the rinse
and warm-up process.
W a r n i n g ! R e m o v e t h e
"Intenza" fi lter before adding
the descaling solution.
• Hold the "
seconds. The display will show the icon
on the side.
Red
If you press the "
by mistake, press the "
" to quit.
• Press the "
activation of the descaling cycle.
From now on, descaling cycle
must be fully completed.
Note: should the containers
fi ll up, temporarily suspend
the dispensing process in order to
empty the containers.
If descaling solution and/or water
spills out of the dispensing spout:
PAUSE: turn the selector dial to the
" " position;
START: turn the selector dial to the
" " position.
If descaling solution and/or water
spills out of the steam wand:
PAUSE: turn the selector dial to the
" " position;
START: turn the selector dial to the
" " position.
" button pressed for 5
" button
" button to confi rm the