Last Number Redial; Call Forwarding - All Calls - NEC UNIVERGE DT310 User Manual

Last Number Redial

To Recall the Last Number Dialed
Press Redial. Receive special dial tone.
REDIAL[#]/SPEED[ ]
Press #. The number dialed will be redialed and
displayed.
REDIAL[#]/SPEED[ ]
Note: Each time the Redial key is pressed the numbers
dialed for the last five calls are displayed
sequentially.

Call Forwarding - All Calls

To Set
Press Speaker key. Receive dial tone.
Press FD-A key or dial Call Forward-All access
code. Receive special dial tone.
Dial destination station or outside telephone
number. Receive service set tone
FD-A LED lights (at your station if FD-A key was
used).
Press Speaker key. Call Forwarding for all calls is
set.
–1
2001
Last number dialed
–1
2001
Last number dialed
FWD
4:26 PM
To Verify (With Multi-line Phone)
Press Speaker key. Receive extension dial tone.
Press FD-A key or dial Call Forward-All access
code.
Display indicates the station number calls are
forwarded to.
FWD
4:26 PM
To Cancel
Press Speaker key. Receive dial tone.
CNCL
4:26 PM
Press FD-A key plus * or dial Call Forward - All
cancel code. Receive serve set tone. LED goes out
at your station (or the phone of the sub line station).
Press Speaker key.
32
Forwarding
station
2000
TUE 12 FEB 2008
2000
TUE 12 FEB 2008
TUE 12 FEB 2008