Control Panel; Heating Elements; Oven Floor; Surfaces - GE J2S968 Owner's Manual

Self-cleaning dual fuel convection
Hide thumbs Also See for J2S968:
Table of Contents

Advertisement

Available languages

Available languages

Center vent
Press down and pull out.
Stainless Steel Surfaces
Do not use a steel-wool pad; it will
scratch the surface.
Shake bottle well.
Place a small amount of Stainless
Steel Appliance Cleaner on a damp
cloth or damp paper towel.
Clean a small area (approximately
8" x 8" [20.3 cm x 20.3 cm]),
rubbing with the grain of the
stainless steel if applicable.
Dry and buff with a clean, dry paper
towel or soft cloth.
Repeat as necessary.
NOTE: If a mineral oil-based stainless steel
appliance cleaner has been used before
to clean the appliance, wash the surface
Oven Vent
The oven is vented through an opening
in the cooktop under the grille.
Never cover the opening with aluminum
foil or any other material. This would

Control Panel

If desired, the touch pads may be turned off
before cleaning.
See the Control Lockout section.
Clean up splatters with a damp cloth.
Oven Heating Elements
Do not clean the broil element. Any soil
will burn off when the element is heated.
Clean the oven floor with warm, soapy
water.
Removable Oven Floor
To remove the oven floor for easier
cleaning:
Remove the oven door using the
instructions in the Lift-Off Oven Door
section.
Press down and pull out the
removable oven floor.
www.GEAppliances.ca (Canada)
with dishwashing liquid and water prior
to using the Stainless Steel Appliance
Cleaner. After washing the surface with
dishwashing liquid and water, use a
generous amount of Stainless Steel
Appliance Cleaner to clean the appliance.
To Order
To order Stainless Steel Appliance
Cleaner, please call our toll-free number:
National Parts Center
800.626.2002 (U.S.)
800.661.1616 (Canada)
ge.com (U.S.)
www.geappliances.ca (Canada)
Stainless Steel Appliance
Cleaner . . . . . . . . . . . . . . . . . . . .# PM10X311
prevent the oven vent from working
properly.
You may also use a glass cleaner.
Remove heavier soil with warm soapy
water. Do not use abrasives of any kind.
Turn on the touch pads after cleaning.
Clean the oven floor with warm
soapy water.
When reinstalling the oven floor, be
sure to slide it all the way to the back
of the oven.
IMPORTANT: Always replace the
removable floor before the next use.
ge.com (U.S.)
33

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

J2c968Profile j2s968bh

Table of Contents