GE Profile J2S968BH Specifications

TM
J2S968BH/KH/SH/TH – GE Profile
Dimensions (in inches) and Installation Information
24
31-1/4
2-7/8"
To Front
Surface Of
Countertop
20-5/8"
Door Clearance
From Front
Surface of
Countertop
27-1/2
44-3/4
Counter Cutout Dimensions (in inches)
If you are using the
If you are NOT using the
optional Filler or Backguard: optional Filler or Backguard:
23-3/16
30
Specification Revised 11/03
221203
™ 30" Slide-In Dual-Fuel Range
Accessory
Backguard
30 Min .
4 Min.
From Walls
4
2"
(Grates)
30 Min .
23-3/16
36
Max. depth of
cord, plug,
receptacle box
& gas hookup
3-1/2 to prevent
36
interference
with drawer
3
15
29-15/16 Min.
30-1/16 Max.
25
30
You must use the rear filler strip kit shipped with the range or the
Shave Raised Edge To Clear
31-1/8 Wide Control Panel optional accessory backguard (JXS31, JXS32, JXS33, JXS34) when
installing these ranges.
9/16
Note: Cabinets installed adjacent to slide-in ranges must have an
adhesion spec of at least 194°F temperature rating.
Optional Kits for Slide-In Gas Ranges:
(Available at additional cost)
13 Max.
18 Min.
Lower/Side Trim Kits
JXS52BB—Lower Trim Kit (Black)
JXS53WW—Lower Trim Kit (White)
25
JXS55CC—Lower Trim Kit (Bisque)
Acceptable
Gas Line &
Electrical
Endcap Kit
Outlet Area
JXS40—Endcap kit to accommodate
7
replacement where countertop may
12
already be notched.
Installation Information: Before installing, consult installation instructions
packed with product for current dimensional data.
Accessory Backguards
JXS31—White Accessory Backguard
JXS32—Brushed-Chrome Accessory
JXS34—Black Accessory Backguard
JXS35—Bisque Accessory Backguard
All GE ranges are equipped
with an Anti-Tip device.
The installation of this
device is an important,
required step in the
installation of the range.
For answers to your Monogram,
GE appliance questions, visit our website at
Listed by
Underwriters
GEAppliances.com or call
Laboratories
R
GE Answer Center
Backguard
® GE Profile ™ or
® service, 800.626.2000.