Charcoal Filter - AEG 341 D Operating And Installation Manual

Charcoal filter

• The charcoal filter should only be used if you want to use the hood
in recirculation mode.
• The charcoal filter cannot be washed nor regenerated.
The charcoal filter should be replaced every 4 months under normal
use.
Replacement filters are available from your local Service Force
Centre.
Fitting - Fig. 4
Remove the grille.
Place the charcoal filter to cover the grill that protects the extraction
motor so that the slots on the filter correspond to the pins on the
sides of the motor protection grill.
Turn the filter clockwise in order to lock the filter into position.
Remount the grille.
• To remove proceed in the reverse order.
• Always specify the hood model code number and serial number
when ordering replacement filters. This information is shown on the
rating plate located on the inside of the unit.
• The charcoal filter can be ordered from your local Service Force
Centre.
Fig. 4 - 341 D: two charcoal filters
60
DE 3161: one charcoal filter