Maintenance And Care; Paper Grease Filter - AEG 341 D Operating And Installation Manual

Maintenance and Care

• The hood must always be disconnected from the electricity
supply before beginning any maintenance work.

Paper grease filter

• The purpose of the grease filters is to absorb grease particles which
form during cooking and it must always be used, either in the
external evacuation or internal recycling function.
The paper grease filter is very thin (approx. 1 mm) and positioned
on the inside of its related support grille.
The filter should be changed once a month.
• The grille should be cleaned with luke warm water and non-abrasive
detergent when you change the filter.
• The grease filter can be ordered from your local Service Force
Centre.
Opening the grille
Open the latch and remove the grille downwards. Fig. 3
Removing the filter
Remove the stops to take out the filter. Fig. 3
• Clean the inner housing using a hand hot solution only(never use
caustic detergents, abrasive powders or brushes).
Fig. 3
59