Abit BX6 User Manual page 80

D-4
Step6: Information: Click 'OK'
After previous instructions have been followed, the driver will automatically
install. It will automatically restart the computer after it has finished installing.
Step7: When you restart your Windows
screens. After you see the screen below, please set the path to
C:\WINDOWS\SYSTEM\IOSUBSYS then finish the following steps. You
will need to restart Windows, then Windows will find several I/O devices,
when finished with this procedure, you will need to restart Windows
yet again. This will fully complete the installation of the IDE Bus Master
drivers.
®
95, just follow the step shows on the
Appendix D
®
95