Abit BX6 User Manual page 40

3-18
DRAM Data Integrity Mode:
Two options are available: Non-ECC or ECC. This option use to configure the
type of DRAM in your system. ECC is Error Checking and Correction, when
your memory is ECC memory, choose the ECC option.
System BIOS Cacheable:
You can select Enable or Disable. When you select Enabled, you get faster
system BIOS executing speed via the L2 cache.
Video BIOS Cacheable:
You can select Enable or Disable. When you select Enabled, you get faster
video BIOS executing speed via the L2 cache.
Video RAM Cacheable:
You can select Enable or Disable. When you select Enabled, you get faster
video RAM executing speed via the L2 cache. You must check your VGA
adapter manual to find out if any compatibility problems will occur.
8 Bit I/O Recovery Time:
Nine options are available: NA è 8 è 1 è 2 è 3 è 4 è 5 è 6 è 7
è
. This option specifies the length of a delay inserted between
Back to NA
consecutive 8 bit I/O operations. For an earlier 8 bit Add-on card, sometimes
you need to adjust its recovery time to make it work normal.
16 Bit I/O Recovery Time:
Five options are available: NA è 4 è 1 è 2 è 3 è
option specifies the length of a delay inserted between consecutive 16 bit I/O
operations. For an earlier 16 bit Add-on card, sometimes you need to adjust
its recovery time to make it work normal.
Memory Hole At 15M-16M:
This option is used to free up the 15M-16M memory block. Some special
peripherals need to use a memory block located between 15M and 16M, and
this memory block has a size of 1M. We recommend that you disable this
option.
Chapter 3
. This
Back to NA