Abit BX6 User Manual page 62

A-2
Note: Be sure that the red line on the cable connects to the first pin of the connectors.
Installing CD-ROM drive
Watch the pin position and the orientation
IDE2 (Secondary IDE): Connect one end of the 40-pin cable that comes with the
drive to the CD-ROM connector, and the other end to the IDE2 pin connector on
the motherboard.
Note: Be sure that the red line on the cable connects to the first pin of the connectors.
Installing Keylock and power LED connectors
Watch the pin position and the orientation
PN1 Pin 1-5: There is a specific orientation for pin 1 to pin 5. Insert the two-
threads keylock cable into pin 4 and pin 5, and three-threads power LED cable to
Pin 1 ~ pin 3. Correct pins of header on the motherboard.
Pin number
1
2
3
4
5
Installing HDD LED connector
Watch the pin position and the orientation
PN1 Pin 7-8: There is a specific orientation for pin 7 and pin 8. Connect the two-
threads IDE HDD LED connector of the computer case to correct pins of header
on the motherboard.
Pin number
7
8
Name of the signal or signification
+5VDC
No connection
Ground
Keyboard inhibit Signal
Ground
Name of the signal or signification
LED power
HDD active
Appendix A