Abit BX6 User Manual page 63

Quick Installation
Installing power On/Off switch connector
PN1 Pin 10-11 : There is no specific orientation for pin 10 and pin 11. Connect
the two-threads power switch cable to the PN1 header pins on the motherboard.
Pin number
10
11
Installing suspend switch connector
PN1 Pin 13-14: There is no specific orientation for pin 13 and pin 14. Connect
the two-threads suspend switch connector of the computer case to correct pins of
header on the motherboard. You can ignore this connector since most of computer
cases do not support this feature (the motherboard itself supports it).
Pin number
13
14
Installing Hardware Reset Switch Connector
PN2 Pin 1-2: Attach the cable from the case's Reset switch to this header. Press
and hold the reset button for at least one second to reset the system.
Pin number
1
2
Installing speaker connector
PN2 Pin 4-7: There is no specific orientation for pin 4 and pin 7. Connect the
four-threads speaker cable to the PN2 header pins on the motherboard.
Pin number
4
5
6
7
Name of the signal or signification
Power On/Off switch
Ground
Name of the signal or signification
Vcc
Suspend signal
Name or significance of signal
Reset input
Ground
Name of the signal or signification
+5VDC
Ground
Ground
Speaker data
A-3