Connecting Sl Wash 180 Rgbw Led Luminaires To Ac Power - Philips SL WASH 180 RGBW LED Luminaire Installation & User Manual

SL WASH 180 RGBW LED Luminaire

Connecting SL WASH 180 RGBW LED Luminaires to AC Power

If the unit is supplied with an AC input cable but you did not order an AC input connector, Table 2 describes how to
connect power to your SL WASH 180 RGBW LED Luminaire. Field wiring of the SL WASH 180 RGBW LED
Luminaire is straight forward. A total of 3 wires/conductors need to be brought to the unit. The following wiring
scheme is required:
AC Input Connector (on Unit)
Neutral
AC Connector
(on side of unit)
CAUTION: In the event the AC input cable of this luminaire is damaged, it must be replaced, by the user, with an
approved cable through an Authorized Showline Dealer or Service Center.
Sh wline
Table 2: SL WASH 180 RGBW LED Luminaire AC Input Connections
Wire Color
Brown
Blue
Green/Yellow
AC Input Connector
Ground / Earth
Figure 3: SL WASH 180 RGBW LED Luminaire AC Input & Output Connections
Main / Line (100 to 240VAC)
Ground (Earth)
AC Output (Thru) Connector (on Unit)
Main /
Line
AC Connector
(on side of unit)
Installation & User's Manual
Purpose
Neutral
Luminaire
AC Output (Thru) Connector
Main /
Line
Ground / Earth
Connecting Power
Neutral
7