Philips SL WASH 180 RGBW LED Luminaire Installation & User Manual page 23

SL WASH 180 RGBW LED Luminaire
Table 12: SL WASH 180 RGBW LED Luminaire DMX Channel Mapping (16-Bit Mode)
8 Strobe
9 Duration
10 Zoom
11 Focus Timing
12 Intensity Timing
13 Color Timing
14 Zoom Timing
15 Control
16 Red - High Byte
17 Red - Low Byte
18 Green - High Byte
19 Green - Low Byte
20 Blue - High Byte
21 Blue - Low Byte
22 White - High Byte
23 White - Low Byte
Sh wline
0 - 255 0 - 100%
0 - 255 0 - 100%
0 - 255 0 - 100%
0 - 255 0 - 100%
0 - 255 0 - 100%
0 - 255 0 - 100%
0 - 255 0 - 100%
0 - 255 0 - 100%
0 - 65535 0 - 100%
0 - 65535 0 - 100%
0 - 65535 0 - 100%
0 - 65535 0 - 100%
Installation & User's Manual
Controls strobe operations as follows:
Open = DMX 0 - 2
Closed = DMX 3 - 5
Slow Rand = DMX 6 - 7
Med Rand = DMX 8 - 10
Fast Rand = DMX 11 - 12
Strobe Range = DMX 13 - 127 (fastest)
0
Pulse + Slow Rand = DMX 128 - 129
Pulse + Med Rand = DMX 130 - 131
Pulse + Fast Rand = DMX 132 - 133
Pulse + Range = DMX 134 - 191
Pulse - Slow Rand = DMX 192 - 193
Pulse - Med Rand = DMX 194 - 195
Pulse - Fast Rand = DMX 196 - 197
Pulse - Range = DMX 198 - 255
Strobe's duration, Range is DMX 0 - 85 as
follows:
0 0 = DMX 0
1 = DMX 1 - 3
x = (DMX Value-1)/3+1
85 = DMX 253-255
Control of variable zoom (beam spread)
0
operation from 12 to 45 degrees
255 Timing control of Pan and Tilt
Allows for timing control of Intensity. Channel
should default to 255 for smoothest actions using
255
console and/or manual fades. Refer to
Timing Channel Detail" on page 26
Allows for timing control of Color. Channel should
default to 255 for smoothest actions using
255
console and/or manual fades.Refer to
Timing Channel Detail" on page 26
Allows for timing control of Zoom. Channel
should default to 255 for smoothest actions using
255
console and/or manual fades.Refer to
Timing Channel Detail" on page 26
Control Channel functions of the SL Series
products. Set control channel value from 0 then
turn to desired action. Hold value for at least 5
seconds. Then restore control channel value to 0
without any scaling.
Default Setting on Console = DMX 0-4
DIM Response_Normal = DMX 5 - 9
DIM Response_Incandescent = DMX 10 - 14
0
Dimming Curve_Linear = DMX 30 - 34
Dimming Curve_Square = DMX 35- 39
Dimming Curve_S-Curve = DMX 40 - 44
Dimming Curve_PL-Curve = DMX 45 - 49
Calibration_OFF = DMX 70 - 74
Calibration_ON = DMX 75 - 79
Fan_Auto = DMX 80 - 84
Fan_Off = DMX 85 - 89
Reserved ( Future use) = DMX 90 - 250
0 16-bit control for of Red LEDs 0 to full.
0 16-bit control for of Green LEDs 0 to full.
0 16-bit control for of Blue LEDs 0 to full.
0 16-bit control for of White LEDs 0 to full.
SL WASH 180 RGBW LED Luminaire DMX Mapping
"DMX
.
"DMX
.
"DMX
.
21