Hsic Mode - Philips SL WASH 180 RGBW LED Luminaire Installation & User Manual

Installation & User's Manual
Table 14: SL WASH 180 RGBW LED Luminaire DMX Channel Mapping (HSIC Mode)
16 CCT
2. DMX Timing Channel Detail
Timing channel control improves the timed moves of certain groups of parameters. The SL WASH 180 RGBW LED
Luminaire provides timing channels in 16-bit mode (one for intensity time and one for color time) and one timing
channel in 8-bit (color and intensity timing combined). The luminaire uses its timing channel value to calculate a
smooth continuous operation for a given time and transition.
Guidelines:
• Timing channels support time values from zero to 60 minutes.
• To use a timing channel instead of console timing, it is recommended to set the timing channel to the desired value
and set cue and/or console cue fade time to zero. A combination of time controls can produce unexpected results.
• The default value setting in the profile should be 255 (proportional control) to allow smooth operation when using
console timing.
• The timing channel data should change as a snap. A zero value will give the fastest operation, however, without
any smoothing this can appear "steppy" in console timed moves.
Refer to "DMX Timing Channel Detail"
2 6
DMX CONTROL
0 - 255 0 - 100%
for more information.
Table 15: SL WASH 180 RGBW LED Luminaire Timing Channel Detail
% Value
0
1
2
3
4
5
6
7
8
9
10
SL WASH 180 RGBW LED Luminaire
Variable control of correlated color temperature
as follows:
0
Channel OFF (disabled) DMX 0 - 5
2700K - 6500K. DMX 6 - 255
= Seconds
DMX
(unless noted)
0 0 (Full Speed)
1 0.2
2 0.4
3 0.6
4 0.8
5 1
6 1.2
7 1.4
8 1.6
9 1.8
10 2
11 2.2
12 2.4
13 2.6
14 2.8
15 3
16 3.2
17 3.4
18 3.6
19 3.8
20 4
21 4.2
22 4.4
23 4.6
24 4.8
25 5
Sh wline