Settings/General; Settings/Factory Default - Philips SL WASH 180 RGBW LED Luminaire Installation & User Manual

Installation & User's Manual
Level 1
Level 2
Level 3
Use the Up and Down buttons to select security PIN codes. Press the Check button and then use Left and Right and
Up Down buttons to assign the pin code. Press the Check button to save the new PIN code.
The Power-Up Level parameter assigns a lock level to the fixture when power is applied. Use the Up and Down
buttons to select the Power-Up Level, and then use the Left and Right buttons to select the Power-up Level option.
Enter Pass PIN
Level 1 PIN
Level 2 PIN
Level 3 PIN
Power-up Level

Settings/General

Use the Up and Down buttons to select parameters and the Left and Right buttons to assign the different general
fixture settings. When finished, press the Check button to exit the menu level. The adjustable parameters are
described in Table 7.
Power-Up
Mode
Dim Response
Dimming Curve
Calibration
Fan Control

Settings/Factory Default

Factory default menu settings can be recalled through this menu option. You can select if you wish to overwrite the
user edited preset and chases.
Use the Up and Down buttons to select parameters and the Left and Right buttons to assign the different settings.
When finished, press the Check button to exit the menu level. The adjustable parameters are described in Table 8.
1 4
OPERATION AND PROGRAMMING
Table 5: Security Lock Levels
Lock Level
Edit Presets, Edit Chases, and Settings Menu
Settings Menu
All
Table 6: PIN Level Parameters
Parameter
Enter a PIN code matching the level codes assigned in the Settings/Security menu to
toggle the current security level.
Edit the PIN code used to toggle the Level 1 security.
Edit the PIN code used to toggle the Level 2 security.
Edit the PIN code used to toggle the Level 3 security.
Select the security level to default to when the fixture is powered ON.
•
•
Table 7: General Level Parameters
Parameter
Select the action of the fixture when the unit is powered ON. You can select from Off, Last
Set, Color filters, presets, and chases.
Select either Master/Slave (see
Select Normal, Incandescent, or Reduced dimming response.
•
•
•
Select one of four dimming curve choices (see
information).
Toggle Harmonize Color Calibration on or off (see
information).
Select Auto of Off fan operation (see
Mapping
Menu Functions Affected
Description
Disable PIN will disable all security functions.
Locked will lock all functions.
Description
Master / Slave Operational Mode
Normal: Fixture LEDs dim with a normal response.
Incandescent: Fixture LED's dim with an incandescent emulation response. The
response to dimming commands will be slightly delayed at lower intensities.
Reduced: The response to dimming commands will be calculated with a smaller algo-
rithm to provide emulation with other manufacturer's products.
SL WASH 180 RGBW LED Luminaire DMX
for more information).
SL WASH 180 RGBW LED Luminaire
for more information).
Dimming Curve Selection for more
Harmonize Color Calibration
Sh wline
for more