Hsic Mode - Philips SL WASH 180 RGBW LED Luminaire Installation & User Manual

SL WASH 180 RGBW LED Luminaire

HSIC Mode

Table 14 provides DMX channel mapping of all DMX512 control values when the SL WASH 180 RGBW LED
Luminaire is in HSIC (Hue, Saturation, Intensity, and Color Correction) DMX512 mode (as set by the luminaire's
menu system).
Table 14: SL WASH 180 RGBW LED Luminaire DMX Channel Mapping (HSIC Mode)
DMX
Parameter
Channel
1 Pan - High Byte
2 Pan - Low Byte
3 Tilt - High Byte
4 Tilt - Low Byte
5 Master Intensity
6 Strobe
7 Duration
8 Zoom
9 Focus Timing
10 Timing
11 Control
12 Hue - High Byte
13 Hue - Low Byte
14 Saturation
15 Intensity
Sh wline
Range DMX Range%
0 - 65535 0 - 100%
0 - 65535 0 - 100%
0 - 255 0 - 100%
0 - 255 0 - 100%
0 - 255 0 - 100%
0 - 255 0 - 100%
0 - 255 0 - 100%
0 - 255 0 - 100%
0 - 255 0 - 100%
0 - 65535 0 - 100%
0 - 255 0 - 100%
0 - 255 0 - 100%
Default - recom-
mended console Description
default values
0 16-bit control for Pan Operation
0 16-bit control for Tilt Operation
0 8-bit control for Intensity of LED settings.
Controls strobe operations as follows:
Open = DMX 0 - 2
Closed = DMX 3 - 5
Slow Rand = DMX 6 - 7
Med Rand = DMX 8 - 10
Fast Rand = DMX 11 - 12
Strobe Range = DMX 13 - 127 (fastest)
0
Pulse + Slow Rand = DMX 128 - 129
Pulse + Med Rand = DMX 130 - 131
Pulse + Fast Rand = DMX 132 - 133
Pulse + Range = DMX 134 - 191
Pulse - Slow Rand = DMX 192 - 193
Pulse - Med Rand = DMX 194 - 195
Pulse - Fast Rand = DMX 196 - 197
Pulse - Range = DMX 198 - 255
Strobe's duration, Range is DMX 0 - 85 as
follows:
0 0 = DMX 0
1 = DMX 1 - 3
x = (DMX Value-1)/3+1
85 = DMX 253-255
Control of variable zoom (beam spread)
0
operation from 12 to 45 degrees
255 Timing control of Pan and Tilt
Allows for timing control of Intensity, Color and
Zoom parameters. Channel should default to 255
for smoothest actions using console and/or
255
manual fades. Refer to
Channel Detail" on page 26.
Control Channel functions of the SL Series
products. Set control channel value from 0 then
turn to desired action. Hold value for at least 5
seconds. Set control channel value to 0 without
any scaling.
Default Setting on Console = DMX 0-4
DIM Response_Normal = DMX 5 - 9
DIM Response_Incandescent = DMX 10 - 14
255 Dimming Curve_Linear = DMX 30 - 34
Dimming Curve_Square = DMX 35- 39
Dimming Curve_S-Curve = DMX 40 - 44
Dimming Curve_PL-Curve = DMX 45 - 49
Calibration_OFF = DMX 70 - 74
Calibration_ON = DMX 75 - 79
Map_RGBW 16-bit Mode = DMX 100 - 104
Map_RGBW 8-bit Mode = DMX 105 - 109
Map_HSIC Mode = DMX 110 - 114
Reserved ( Future use) = DMX 115 - 250
0 16-Bit control of Hue 0 - 359 Degrees
0 8-bit control for Saturation.
0 8-bit control for Intensity.
SL WASH 180 RGBW LED Luminaire DMX Mapping
Installation & User's Manual
"DMX Timing
25