Digital-In Select - Pioneer VSX-909RDS Operating Instructions Manual

Initial Set Up

Digital-In Select

In order to be able to use your digital equipment properly you need to assign digital inputs for each of the digital
components you connected. Match the Digital 1-5 settings with the digital jacks 1-5 in accordance with what is
connected to each digital jack. Check the digital jack numbers on the back of the receiver to make certain what
component is in which jack (if necessary, see page 13 for more on digital connections). The last setting, the AC-
3 RF setting, is specifically for a DVD/LD player or LD player with an 2 RF output. If you connected one of
these components match this button to the component. If continuing from the last page go to step 1. If starting
fresh, complete steps 1-3 in "Setting Up for Surround Sound" (p.30) first.
Î
USE
S0URCE
MULTI SYSTEM
OPERATION OFF
DVD/LD TV/SAT VCR1
MULTI CONTROL
MD/
CD TUNER
TAPE1
CLASS MPX BAND DIRECT ACCESS
¶ 7 3
- + -
TUNING STATION
1 ¡ 4
-
CHANNEL
1 2 3
4 5 6
7 8 9
0
+10
DISC
RF ATT
+
TV
TV VOL TV CONTROL VOLUME
–
TV FUNC
REMOTE SETUP
INPUT
MENU
ATT
SYSTEM SETUP
+
EFFECT/
CH SEL
ENTER
DIGITAL
–
NR
MULTI CH
MIDNIGHT DSP
INPUT
/DTS/MPEG
LIGHT THX ADVANCED
AV PRE-PROGRAMMED AND LEARNING
REMOTE CONTROL UNIT
32
En
SETUP 1 DIGITAL IN SELECT should be selected (if it
RECEIVER
VCR2
TVCONT
8
+
¢
+
DISPLAY
+
–
MUTE
FUNCTION
1-3
2 Choose a DIGITAL IN and assign it an input
SIGNAL
SELECT
STEREO/
DIRECT
STANDARD
3 Select EXIT and press ENTER button to
isn't use the 5¥∞ buttons to select it).
See "Setting Up for Surround Sound" on page 30 if you need
more information.
Press the ENTER button.
Digital-In Select
Digital-1 [DVD/LD]
Digital-2
[ CD ]
Digital-3 [ MD ]
Digital-4
[TV/SAT ]
Digital-5 [ VCR1 ]
AC-3 RF
[DVD/LD]
[EXIT] L
function.
Use 2 or 3 to choose the input function that matches the
component hooked up to that digital terminal.
The possible choices include: DVD/LD, TV/SAT, CD, MD/TAPE1/
CD-R, VCR 1/DVR, VCR 2. You cannot assign digital inputs to
the TUNER, VIDEO, PHONO, and TAPE 2 MONITOR functions.
If you assign a function (for example DVD/LD) that was
previously assigned to a different Digital In the second Digital In
will automatically revert to an OFF setting. This is because one
function cannot be assigned twice.
return to the SYSTEM SETUP MENU.
If you want to change a setting before proceeding simply
use the arrow buttons to go back.
• For the Digital 1-5 setting you can choose between DVD/
LD, CD, TV/SAT, MD/TAPE 1/CD-R, VCR 1/DVR and VCR 2
functions.
• For the AC-3 RF setting you can choose between DVD/LD,
TV/SAT, VCR 1/DVR and VCR 2 functions.
Remember, if you have a DVD/LD player or LD player you
should hook it up to the analog and digital jacks in addition to
the 2 RF connection described here.