Troubleshooting - Farenheit TI-450 Owner's Manual

TROUBLESHOOTING

SYMPTOM
NO POWER
DISC CANNOT BE
LOADED.
DISC CANNOT BE
READ.
NO SOUND
THE OPERATION
KEYS DO NOT WORK.
SOUND SKIPS.
THE RADIO DOES
NOT WORK, THE
RADIO STATION
AUTOMATIC
SELECTION DOES
NOT WORK.
CAUSE
THE CAR IGNITION IS
NOT ON.
THE FUSE IS BLOWN.
PRESENCE OF DISC
INSIDE THE PLAYER
INSERTING THE DISC IN
UPSIDE DOWN.
COMPACT DISC IS
EXTREMELY DIRTY OR
DEFECTIVE.
TEMPERATURE INSIDE
THE CAR IS TOO HIGH.
VOLUME IS IN MINIMUM.
WIRING IS NOT
PROPERLY CONNECTED.
THE BUILT-IN
MICROCOMPUTER IS NOT
OPERATING PROPERLY
DUE TO NOISE.
FRONT PANEL IS NOT
PROPERLY FIX INTO ITS
PLACE.
THE INSTALLATION
ANGLE IS MORE THAN 30
DEGREES.
THE DISC IS EXTREMELY
DIRTY OR DEFECTIVE.
THE ANTENNA CABLE IS
NOT CONNECTED THE
SIGNALS ARE TOO WEAK.
SOLUTION
IF THE POWER SUPPLY IS PROPERLY
CONNECTED TO THE CAR
ACCESSORY SWITCH THE IGNITION KEY
TO "ACC".
REPLACE THE FUSE.
REMOVE THE DISC IN THE PLAYER
THEN PUT A NEW UPWARD.
INSERT THE COMPACT DISC WITH THE
LABEL FACING
UPWARD.
CLEAN THE DISC OR TRY TO PLAY A
NEW ONE.
COOL OFF UNTIL THE AMBIENT
TEMPERATURE RETURNS TO
NORMAL.
ADJUST VOLUME TO A DESIRED LEVEL.
CHECK WIRING CONNECTION.
PRESS THE POWER BUTTON FOR
ABOUT 10 SECONDS
TO RESET THE UNIT.
ADJUST THE INSTALLATION ANGLE TO
LESS THAN 30
DEGREES.
CLEAN THE COMPACT DISC/TRY TO
PLAY A NEW ONE.
INSERT THE ANTENNA CABLE FIRMLY
SELECT A STATION
MANUALLY.
24