Table of Contents
Advertisement
Before
The ZGW124 and ZGW125 gas cooktops are not
convertible to LP gas. They are designed to operate
using your
on natural gas only.
gas burners
This component has one large 10,500-BTU
burner and one smaller 6,000-BTU burner.
When a downdraft vent is used next to a gas
component, food will cook faster if you use a
low vent setting and keep the pan covered (if
recipe allows).
Automatic
Both burners on this gas cooktop component
are lighted by electric ignition that eliminates
ignition
the need for standing pilot lights.
Auto relight
The burners on this gas cooktop automatically
relight if the flame goes out. This helps prevent
the inconvenience of manually having to
relight a burner. As with automatic ignition, all
of the burner igniters spark while a burner is
relighting. Do not touch any of the burners
when the igniters are sparking.
Power
In case of a power outage, you can light the
surface burners on your cooktop with a match.
outage
Holding a lighted match to the burner, turn
the knob to the LO position.
If the knob setting is toward HI, the flame
flare-up could burn your hand. Use extreme
caution when lighting burners manually.
Cookware should not be in place over the
burner when lighting a burner this way.
Gas Burner Component
Component Cooktop System
All the igniters make sparking sounds and
spark even when only a single burner is being
turned on. Do not touch any of the burners
when the igniters are sparking.
The burners will relight at any setting.
However, for the burners to light quickly and
consistently when the gas is turned on, the
knobs should be turned to the LITE position
until ignition occurs.
Surface burners in use when an electrical
power failure occurs will continue to operate
normally.
15
Advertisement
Table of Contents
