Burner Assembly; Problem Solver - GE 36 Owner's Manual

Stainless steel professional 36′′ and 48′′ gas cooktops
Hide thumbs Also See for 36:
Table of Contents

Advertisement

Questions?
PROBLEM
Use this
BURNERS DO
NOT LIGHT
problem
solver!
BURNER FLAMES
VERY LARGE
OR YELLOW
TICKING SOUND
OF SPARK IGNITOR
AFTER BURNER
LIGHTS
STRONG ODOR
The Problem Solver
POSSIBLE CAUSE
• Burners assembled incorrectly after cleaning. Make sure the
burner assembly is put together correctly and that the outer
caps/burner ports are aligned.
• Ports blocked in the outer cap near the ignitor. Clean and
reassemble. See "Burner assembly" in the Care and Cleaning section.
• Inspect the manual cut-off valve to insure that it is not closed.
• Make sure the electrical plug is plugged into a live power outlet.
• Check for a power outage.
• Improper air/gas ratio in burners. Call for service.
• The spark ignitor is not deactivated. Turn the burner OFF
and relight. Some ticking is normal. If ticking is excessive,
call for service.
• Improper air/gas ratio in burners. Call for service.
Stainless Steel Cooktop
19

Advertisement

Table of Contents
loading

Table of Contents