Care And Cleaning; Burner Assembly; Control Knobs - GE JGP326 Owner's Manual

Careand cleaning of the cooktop. CEAppliances.com
Be sure electrical power is off and all surfaces are cool before cleaning any part of the cooktop.
How to Remove Packaging Tape
To assure no (lmnage is d(me to the finish
of the product, the safest way to remove
the adhesive left fl'om packaging tape on
new appliances is an application of a
household liquid dishwashing demtgent,
mineral oil or cooking oil.
Appl.v _ith a spit dofl_ and allow to soak.
Wipe (li T and then apply an appliance
polish to thoroughly clean and protect
the suHi_ce.
NOTE."Theplastic tape must be removed from all
chrome trim. It cannot be removed if it is baked on.
Control Knobs
(:lean up spatters with a damp cloth.
Remoxe heaxier soil with wam_, soap)
water:
Donot useabrasivesof any klhd on the control
panel
The control knobs may be removed for
easier cleaning. To remove a knob, pull it
straight off the stem. X*\'ash the knobs in
soap and water but do not soak.
Pull the knob straight off the stem.
Burner
cad
Burner h eao
Mixil, [tiDe Spark i gniter
Burner b oa
CAUTION: DONOT OPERATETHE
BURNERWITHOUTALL BURNER
PARTSIN PLACE
Burner Assembly
The bm'ner assemblies should be washed
regularly and, of course, alter spillovers.
Turnall controls off before removing burner parts.
The bm'ner grates, bm'ner heads and
bttYnet" C_lps C_ltl
be
YetI/oved fi)t" easy
cleaning. Removing them gives you
access to the burner bowls.
The electrode of the spark igniter is
eN)osed beyond the sm'fi_ce of the
bm'ner bowl. When cleaning the bm'ner
bowl, be careful not to snag the electrode
of the spark igniter with yore" cleaning
cloth. Damage to the igniter could occm:
Toavoid snagging a cloth on the spark
igniter, leave the burner heads in place
when cleaning the burner bowls.
Be carefitl not to push in any cooktop
controls while cleaning the bm'ner bowls.
A slight electrical shock might result
which cottld cattse vott to knock over hot
cookware.
Wash bm'ner parts with an alli)mi)ose
non-abt'asive cleaner and w;itl/l water.
Soak stubborn soil. Dt_' them with a
cloth----<lo not reassemble while wet.
If the igniter orifice gets dirt_ or clogoed
VO/I Ill,IV /lSe a sI/tall sewino needle t()
remoxe the soil.
To reassemble, replace the bm'ner head
first, then the burner cap and finally the
burner grate.
9