Ignition Switch - Cub Cadet 414 Operator's Manual

4x2 utility vehicle
Hide thumbs Also See for 414:
Table of Contents

Advertisement

To engage the parking brake, push brake pedal
down firmly, pull out on the parking brake latch, and
release foot from brake pedal. Brake pedal will stay
down and parking brake light on dash will come on
to indicate parking brake is engaged.
To release parking brake, push down on brake
pedal and parking brake latch will release.
Parking Brake
Latch
Figure 3

Ignition Switch

WARNING: Never leave a running machine
unattended. Always set parking brake, stop
engine and remove key to prevent unintended
starting.
The ignition switch is located on the right side of the
dash panel. To start the engine, insert the key into the
ignition switch and turn clockwise to the START
position. Release the key into the ON position once
engine has fired. See Figure 4.
NOTE: The shift controller will return the transmission to
neutral when the key is turned off. If the lever under the
cargo box is not in neutral it must be manually returned
to neutral to start engine. Refer to SECTION
8:Troubleshooting, page 20, Figure 22.
On
On/
Lights
Stop
Ignition
Switch
Figure 4
Refer to Starting The Engine in the Operation Section of
this manual for detailed starting instructions
The ignition switch is also used to operate the utility
vehicle's headlights. Refer to Operating The Headlights on
page 11 of this manual for detailed instructions.
Start
Horn Plug
Horn Switch
(Optional)
The horn switch is located on the right side of the dash
panel. Push button to activate horn. See Figure 4.
12V Power Outlet
The 12V power outlet is located on the right side of the
dash panel. It is used for the convenience of plugging in
accessories that require a power source with a
maximum load of 5 amps at 12 volts. See Figure 4.
Accessory Power Switch
If equipped, the accessory power switch is located on
the right side of the dash panel. This switch turns power
on or off for optional accessories. See Figure 5.
Cargo Box Electric Lift Switch
If equipped, the cargo box electric lift switch is located
on the right side of the dash panel. It activates lift to
raise and lower cargo box. See Figure 5.
Rear Power Outlet
If equipped, the rear power outlet is located on the right
side of the dash panel. It turns power on and off for the
rear outlet. See Figure 5.
Accessory
Power
Switch
(Optional)
Cargo Box Electric
Lift Switch
Warning Light Cluster
The warning light cluster is located in the middle of the
dash panel. There are two warning lights: battery light,
and parking brake light. The parking brake light indi-
cates when parking brake is engaged. The battery light
will indicate that the battery is not charging. See Figure
6.
Battery
Light
BATTERY
8
(Optional)
(Optional)
(Optional)
(Optional)
Rear Power
Outlet
(Optional)
(Optional)
Figure 5
DIE CUT
DIE CUT
PARKING
HOURS 1/10
DIE CUT
Parking
Brake
Light
Hour Meter
Figure 6

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Big country 414

Table of Contents