Ignition Switch - Cub Cadet Big Country 640 Operator's Manual

6x4 utility vehicle
Hide thumbs Also See for Big Country 640:
Table of Contents

Advertisement

To engage the parking brake, push brake pedal
down firmly, pull out on the parking brake latch, and
release foot from brake pedal. Brake pedal will stay
down and parking brake light on dash will come on
to indicate parking brake is engaged.
To release parking brake, push down on brake
pedal and parking brake latch will release.
Parking Brake
Latch
Figure 3

Ignition Switch

WARNING: Never leave a running machine
unattended. Always set parking brake, stop
engine and remove key to prevent unintended
starting.
The ignition switch is located on the right side of the
dash panel. To start the engine, insert the key into the
ignition switch and turn clockwise to the START
position. Release the key into the On position once
engine has fired. See Figure 4.
NOTE: The gearshift must be in the neutral position to
start engine.
On
On/
Lights
Stop
Ignition
Switch
Figure 4
Refer to Starting The Engine in the Operation Section of
this manual for detailed starting instructions
The ignition switch is also used to operate the utility
vehicle's headlights. Refer to Operating The Headlights on
page 11 of this manual for detailed instructions.
Horn Switch
(Optional)
The horn switch is located on the right side of the dash
panel. Push button to activate horn. See Figure 4.
Start
Horn Plug
12V Power
Outlet
12V Power Outlet
The 12V power outlet is located on the right side of the
dash panel. It is used for the convenience of plugging in
accessories that require a power source with a
maximum load of 5 amps at 12 volts. See Figure 4.
Accessory Power Switch
If equipped, the accessory power switch is located on
the right side of the dash panel. This switch turns power
on or off for optional accessories. See Figure 5.
Cargo Box Electric Lift Switch
If equipped, the cargo box electric lift switch is located
on the right side of the dash panel. It activates lift to
raise and lower cargo box. See Figure 5.
Rear Power Outlet Switch
The rear power outlet switch is located on the right side
of the dash panel. It turns power on and off for the rear
outlet, which, if equipped, is located on the rear right
side of the unit and is used for the convenience of
plugging in accessories. See Figure 5.
Accessory
Power
Switch
(Optional)
Cargo Box Electric
Lift Switch
Warning Light Cluster
The warning light cluster is located in the middle of the
dash panel. There are four warning lights: battery light,
parking brake light, engine oil pressure light, and low
fuel light. The parking brake light indicates when parking
brake is engaged. The engine oil pressure light activates
when engine has low oil pressure. The battery light will
indicate that the battery is not charging. The low fuel
light activates when fuel is low in tank. See Figure 6.
Battery
Light
BATTERY
FUEL
Low Fuel
Light
8
(Optional)
(Optional)
(Optional)
Rear Power
Outlet Switch
(Optional)
(Optional)
Figure 5
Engine Oil
Pressure Light
DIE CUT
DIE CUT
OIL PRESSURE
DIE CUT
PARKING
HOURS 1/10
DIE CUT
DIE CUT
Hour Meter
Figure 6
Parking
Brake
Light

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents