If The Memory Becomes Full - Sharp FO-2150 Operation Manual

If the memory becomes full...

If the memory becomes full while the document is being scanned,
MEMORY IS FULL will appear in the display.
Press the START key if you want to transmit the pages which
have been stored up to that point in memory. The remaining pages
will be ejected from the feeder. After transmission, the memory
will be cleared and you can transmit the remaining pages. You
will also need to transmit the page which was being scanned when
the memory filled up.
Press the STOP key if you want to cancel the entire transmission.
Sending Documents From Memory
8-17