Table of Contents
Advertisement
TOC
Image Alignment
The Image Alignment button will allow you to nudge the
image up, down, left, or right on your disc. To center the
image, click the Image Alignment button. You will be
prompted with a choice to print a test print or simply enter
values to nudge the image alignment on the disc.
If you do not know the direction and distance to move the
image in order to center it on your disc, you can opt to print
the
centering test
an ink cartridge installed, and it is connected and ready to
receive a print job, and then click the Yes button. The
Publisher will pick a disc and print a scale of numbers on it.
You will be prompted to open the Publisher's front
cover, rotate the printed disc 180 degrees, reload it
into the input, and close the cover. Click OK
when ready and the Publisher will pick the disc
and print another scale of numbers. The disc
should look like this:
print. Make sure the Publisher has discs and
5
5
BACK
4
4
3
3
2
2
1
1
NOTE:
0
0
After printing this image
-1
-1
once, rotate this CD
-2
-2
so the ARROWS point
-3
-3
-4
to the BACK of the printer
-4
-5
and print again.
-5
INDEX
BACK
number)
SAME
the
be
(must
tough
lines
whose
number
the
enter
and
Find
Calibration
Vertical
5
4
3
2
1
0
-1
-2
-3
5 4 3 2 1 0 -1 -2 -3 4 -5
number)
SAME
the
be
(must
tough
lines
whose
number
the
enter
and
Find
Calibration
Horizontal
Creating Discs
-4
-5
45
Hide quick links:
Advertisement
Table of Contents
