Rear Panel - Primera Bravo se Disc Publisher User Manual

TOC
With the cover closed, the
Publisher's power OFF if pressed and held for five seconds.
Press it quickly to turn power back on. When already powered
on quickly pressing the power button will open and close the
printer tray.
When the front cover is opened, the Power/Ink Button is
used to position the Cartridge Carrier for easy ink cartridge
replacement.
The Input/Output Bins
Publisher. The right-side bin is the Input Bin for blank media.
The bin will hold up to 20 discs.
The Output bin is located in front of the recorder drive. You
can access the output bin by opening the front cover or by
pulling the bin out. The bin can be ejected at any time while
the Publisher is operating. It is recommended that you close
drawer for multiple disc operation. Leave the drawer open
only for single disc dispensing.
The Front Cover is a durable plastic cover that will protect the
Publisher from dust and interference.
The Ink Cartridge Carrier holds the color ink cartridge.

Rear Panel

This illustration shows the input ports found on the rear panel
of the Publisher:
The USB 2.0 Port is connected to an open USB 2.0 port on your
PC with the USB 2.0 cable, included with your Publisher.
The Power Input
The power supply is a switching 100V~240V power supply.
4 Getting Started
Power/Ink Button
are situated under the top cover of the
USB 2.0 Port
Port connects to the included power cable.
INDEX
turns the
Power Input Port