Primera Bravo se Disc Publisher User Manual page 10

Table of Contents

Advertisement

TOC
3. The Recorder Tray opens automatically and the Robotic
Disc Transporter places a disc into the recorder. After the
disc is placed in the recorder, the Robotic Disc Transporter
checks the input stack to "see" if two discs were picked.
4. The Recorder Tray then automatically shuts. If a disc does
not record properly (meaning that all or part of that disc is
not recordable), the Robotic Disc Transporter picks it out of
the
CD Tray
5. The Recorder is now writing to the disc. If you were to
fully record a CD with data, audio, video or music (650
MB), recording time is about 3 ½ minutes each. A full DVD
records in about 7-15 minutes depending on the speed of
the media to which you are recording. Most jobs don't fill
the entire disc, so recording time is usually less than this.
After recording, the Recorder Tray opens automatically.
The Robotic Disc Transporter will lift the disc out of the
Recorder Tray. The Recorder Tray will close, and the
Printer Tray will open. The Robotic Disc Transporter will
lower the disc into the Printer Tray, and the Printer Tray
will then automatically close.
6. If publishing more than one disc, the Robotic Disc
Transporter will load the Recorder Drive with a blank disc
from the Input Bin to start recording the next round.
7. Once recording has started on the next round, printing will
start with the recorded disc from the previous round. This
simultaneous printing and recording greatly increases the
throughput of your Publisher.
8. Print time varies according to which print mode has been
selected (Section 3-A). In most cases, print time takes no
more than 2 minutes. After printing the first disc, the
Publisher's Printer Disc Tray opens automatically. The
Robotic Disc Transporter moves the finished disc to the
Output Bin.
9. The Robotic Disc Transporter will now load the second
recorded disc into the Printer Tray for printing.
10. The process starts over and repeats until all blank discs are
gone or the number you have specified via software are
copied and printed.
6 Getting Started
and sends it to the Output Bin.
INDEX

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents