Related Manuals for TileVision TV/17/FR4/PS
Summary of Contents for TileVision TV/17/FR4/PS
-
Page 1: Operating Instructions
® Operating Instructions TileVision ® is Designed and Manufactured by: PORTER LANCASTRIAN LIMITED www.tilevision.tv... -
Page 2: Teletext Function
You can choose an optimal sound setting for the type of program you are watching. You can switch between Flat, Music, Movie, and Speech, or you can configure the settings yourself. Teletext Function You can display teletext information at any time on your TileVision ® CAUTION RISK OF ELECTRIC SHOCK... -
Page 3: Safety Instructions
Safety Instructions Do not use a damaged socket and do not let the power cord Do not add an additional screen or cover the TileVision’s glass. touch a heat source. – The heated screen prevents condensation forming in steamy – This may cause an electric shock or fire. -
Page 4: Tools Required
Tools Required Suction Lifter Soft Cloth I s op rop y l A lcohol Clear Silicone Sealant Isopropyl Alcohol Silicone Sealant produces acetic acid during cure. Use only in well ventilated areas. Irritating to eyes. Wash hands after use and before meals. Wash splashes from skin, clothing and other surfaces. -
Page 5: Table Of Contents
Table of Contents Safety Instructions ..............................Tools Required ................................Unpacking your TileVision ® ............................Your TileVision ® ................................Connector Inputs ................................Connections ..................................Connecting an Antenna or Cable .......................... Connecting to the Component, S-Video and PC Inputs ................Connecting to the SCART Inputs .......................... -
Page 6: Unpacking Your Tilevision
Unpacking your TileVision ® Please make sure the following items are included with your TileVision ® TileVision ® glass front plate assembly – complete with Velcro fixing strips. waterproof remote control. remote control holder. standard full function remote control. installation and instruction manual. -
Page 7: Your Tilevision
Your TileVision ® Front View Remote control sensor and indicator Power Indicator Status Indicator Status Stand-by Green Power on Red blinking Remote control Connector Inputs Component 12VDC PC Analog Pb (Cb) Pr(Cr) S-Video EURO-SCART Comm. Antenna Audio Audio S-VIDEO In... -
Page 8: Connections
Connections Earthing Points The Earthing connection points are found on the rear of the front plate and are clearly marked with green labels. Connect the earthing cables from the back box to these points. Power Socket The Power socket (1) is located at the extreme left of the connection array. Speaker Connections The speakers should be connected after the Speaker Connection Block... -
Page 9: Connecting An Antenna Or Cable
To view television channels correctly, a signal must be received by the set from one of the following sources: an outdoor antenna, a cable television system or a satellite dish. Connect the antenna or input cable to the 75 coaxial input on the rear of the TileVision ® Rear of the If you are using an indoor antenna, you may need to turn it ®... -
Page 10: Connecting To The Component, S-Video And Pc Inputs
Connect the PC Analog cable (D-SUB) from the RGB output socket of the PC to the PC input socket of TileVision ® Connect the PC Audio cable from the PC to the PC Audio in socket of the TileVision ® Component... -
Page 11: Connecting To The Scart Inputs
The 3.5 mm stereo Headphone socket provides a variable volume audio output which can be connected to the auxiliary input of an audio amplifier. If the TileVision ® is not being installed in a bathroom an extension lead can be connected to the Headphone socket. -
Page 12: Installing The Front Plate
The acrylic bezel can be fitted using silicone sealant once the tape is removed. Note: It is the installer’s responsibility to ensure that the TileVision ® Velcro... -
Page 13: The Remote Control
Remote Control Power On/Off button Turns the TileVision on or off from standby ® PSM (Picture Status Memory) button Recalls the preferred picture setting SSM (Sound Status Memory) button Recalls the preferred sound setting Mute button Turns the sound on or off... -
Page 14: Switching The Tilevision
Switching the TileVision On/Off ® To switch your TileVision ® on, press the POWER ( ) button. To switch your TileVision ® to standby, press the POWER ( button again. Selecting your On-screen Language When you start using your TV for the first time, you must select the language in which to display all on-screen menus. -
Page 15: Selecting A Picture From External Sources
Selecting a Picture from External Sources After your various systems (audio and video) have been connected, you can view any of the sources by selecting the appropriate external input. TIME Make sure all the necessary connections have been made. TV / AV Press the POWER ( ) button to switch the device on. -
Page 16: On-Screen Menus And Displays
On-screen Menus and Displays Press the MENU button to display the Main menu. Colour Temperature Standard Press the PR UD buttons to select menus. Reddish Greenish Press VOL LR buttons to adjust menu items. Bluish User R G B Press MENU to go back to the previous menu. Press TV/AV to exit the menus and confirm settings. -
Page 17: Tuning, Setup And Editing Programs
Tuning, Setup and Editing TV Programmes Note: It is recommended that Auto Programme is used when installing TileVision as all ® available programmes will be stored. Auto Programme Press the MENU button. MENU Press the PR UD buttons to select the Setup menu and then press the VOL R button. -
Page 18: Manual Programme
Tuning, Setup and Editing TV Programmes Manual Programme lets you tune and arrange the programmes in any order you want. You can assign an eight character programme name to each programme number. Manual Programme Press the MENU button. MENU Press the PR UD buttons to select the Setup menu and then press the VOL R button. -
Page 19: Programme Edit
Tuning, Setup and Editing TV Programmes Programme Edit This function enables you to delete, make favourite, move or skip the stored programmes. MENU You can also move channels to different programme numbers, or insert blank programme data into the selected programme number. Press the MENU button. - Page 20 Tuning, Setup and Editing TV Programmes Moving a programme in Programme Edit menu TIME TV / AV Select a programme to be moved with the PR UD or VOL LR buttons. Press the YELLOW button. Move the programme to the desired programme number with the PR UD or VOL LR buttons.
-
Page 21: Picture Control
Picture Control You can adjust Colour Temperature, Contrast, Brightness, Colour and Sharpness to the levels you prefer. Manual Picture Control Press the MENU button. MENU Press the PR UD buttons to select the Picture menu and then press the VOL R button. Select Colour Temperature using the VOL R button. -
Page 22: Auto Picture Control
Picture Control Auto Picture Control The Picture options – Dynamic, Standard, Mild, and Game are programmed for optimum picture reproduction at the factory and cannot be changed. PSM (Picture Status Memory) Press the PSM ( ) button or the PICTURE button on the full function remote control. -
Page 23: Sound Control
Sound Control Preferred sound setting can be selected; Flat, Music, Movie or Speech. Manual Sound Control The Equalizer can be manually adjusted by cutting and boosting the five selected frequency bands and storing the settings as User. MENU The left to right Balance can be adjusted and if AVL is switched on there will be a more equal volume level between programmes. -
Page 24: Sound Output Selection
Sound Control Auto Sound Control The sound settings for Flat, Music, Movie, and Speech are programmed at the factory for optimum sound reproduction, and cannot be changed. SSM (Sound Status Memory) Press the SSM ( ) button or the SOUND ( ) button on the full function remote control. -
Page 25: Pc Picture Adjustment
Connect the PC IN cable (D-Sub) from the monitor output socket TV / AV of the PC to the PC ANALOG input socket of the TileVision ® Connect the PC Audio IN cable from the PC to the PC AUDIO IN of the TileVision ®... - Page 26 PC Picture Adjustment Horizontal Vertical Mode Resolution Frequency (KHz) Frequency (Hz) 640 x 480 31.5 720 x 400 31.4 800 x 600 35.1 SVGA 800 x 600 37.9 1024 x 768 48.4 1024 x 768 56.5 720 x 480p 31.5 720 x 576p 31.2 1280 x 720p...
-
Page 27: Blue Back
VOL R button. Press the PR UD buttons to select Blue Back. Press the VOL LR buttons to select On or Off as required. Auto Sleep and Sleep Timer If you select Auto Sleep On the TileVision will automatically switch ® Special... -
Page 28: Child Lock
Child Lock This function is not applicable to TileVision. ARC (Aspect Ratio Control) TileVision can be viewed in three picture formats by repeatedly Special pressing the ARC ( ) button until the desired image is selected. Blue Back Auto Sleep... -
Page 29: Teletext
Teletext Functions of Teletext Part Display Contents Selected page number. Broadcast Station identity. Current page number or searching status. Date and time. Text information. FasText information. Red, Green, Yellow, Blue Displaying the Teletext Information Press the TEXT ( ) button once to display the Teletext pages. TEXT HOLD Press the MIX (... -
Page 30: Teletext Button Functions
Teletext Button Functions The table below gives a complete explanation of each of the Teletext buttons. TEXT HOLD TIME TV / AV Button Menu Functions Changes Teletext mode – press button for text mode, text and TV picture TEXT side by side, return to TV mode. In Teletext mode –... -
Page 31: Troubleshooting
Troubleshooting No picture or sound. Make sure the AC power cord is connected to the 12V power adaptor. Make sure the 12V DC power cord is connected to the TileVision ® Check for power failure. If the red indicator is not showing press the POWER (... -
Page 32: Specifications
Specifications – TV/17/FR4/PS Model TV/17/FR4/PS External Dimensions (W x H x D) 483 mm x 353 mm x 75 mm Total Weight 12 Kg complete with backbox Requirements 12 VDC/5.0 A Consumption 60 W max, standby below 3 W Power Input 100–240 VAC 50/60 Hz... -
Page 33: Notes
Notes... - Page 34 Notes...
- Page 35 Notes...
- Page 36 PORTER LANCASTRIAN LIMITED www.tilevision.tv TV/17/FR4/PS – 17" Tilevision ® Operating Instructions – February 2007 – Part No. TVS/00298/04...
Need help?
Do you have a question about the TV/17/FR4/PS and is the answer not in the manual?
Questions and answers