Setup Instructions - Honda HRU19RPU Owner's Manual & Service Record Booklet

Setup Instructions

Grass catcher:
Your grass catcher has been left dismantled for ease of packing and transportation.
Catcher component check list: Handle x1, Top cover section x1 & Lower cover section x1.
To assemble, simply clip each item together. First take the handle and place the clips into the
three locating holes on the top cover section. Be sure that the clips are firmly seated [1].
Next take the top cover section and position directly over the lower section [2]. Starting
from the rear, place each clip through the locating holes and push firmly together. Be sure
to check that all clips are firmly seated.
NOTE: The clips are not designed to come apart once they have been locked
together. Do not attempt to unclip as this may damage the grass catcher.
Fitting of grass catcher
Raise the discharge guard and place the lower tongue of the catcher over the rear axle.
Tilt catcher upward and lower the discharge guard over the top of catcher, making sure
that the discharge guard seats firmly over raised lip section.
Always ensure engine is stopped before fitting or removing grass
! WARNING
catcher.
HRU19RPU, HRU19DPU, HRU196PU, HRU196DPU,
HRU197PU, HRU197DPU
[1]
6
[2]