Use this unit only for its intended use as denoted in this above the normal body temperature of 98.6 F. The manual. DO NOT use attachments not recommended symptoms of hyperthermia include an increase in the by the Kohler Co. internal body temperature,...
Follow the sections that pertain Kohler Co. reserves the right to make changes in to your particular installation. This will help you avoid product characteristics, packaging, or availability at any costly mistakes.
1. ROUGHING-IN: K-12105-H*, K-12106-H* A. ORDERING INFORMATION C. PRODUCT INFORMATION Applicable product: ADA compliant Fixture*: basin area top area weight Left outlet K-12105 shown Bathing well 44” x 23” 51” x 26” 265 lbs. Right outlet K-12106 not shown water depth...
WARNING: Risk of electrical shock. Disconnect performance and safe operation of the whirlpool. power before servicing. Kohler Co. shall not be liable under its warranty or WARNING: Risk of injury or property damage. otherwise for personal injury or damage caused by Please read all instructions thoroughly before any such unauthorized modification.
NOTICE: Make sure the unit is within the installation area before final framing is completed. The unit will not fit through a standard door opening. Kohler Co., Kohler, WI 115982-2-...
To ensure ADA compliance, position the module exactly as shown in the roughing-in diagram on Page 4. If the user will have care giver assistance, we recommend that you employ a front entrance. Kohler Co., Kohler, WI 115982-2-...
When fire wall is specified, it should be in place before you install the unit. If unit is to be installed adjacent to a vertical duct or chase, fire-rated gypsum drywall should surround the unit. Kohler Co., Kohler, WI 115982-2-...
B. PROTECT WHIRLPOOL UNIT Position a drop cloth or similar material in the bottom of the unit. Be careful not to scratch the surface of the product. Kohler Co., Kohler, WI 115982-2-...
Attach the unit to the 2x2 brace and toe plate previously installed around the recess rough opening. Use #6 large-head galvanized nails or #8 x 1” sheet metal screws across the top and bottom, and up both sides. Kohler Co., Kohler, WI 115982-2-...
B. PUMP BANDING STRAP CUT Shipping Bracket (leave attached NOTICE: This step is necessary to make your to bath) Kohler whirlpool operate more quietly. Pump Banding Straps Use tin snips to cut the two banding straps. These banding straps secure pump whirlpool-mounted shipping bracket.
Wire grounding adapter. Bonding (Earthing) Lug* Your Kohler whirlpool bath is equipped with a cord and plug. All wiring of the pump and control has been completed at the factory. A licensed electrician must Pump install a GFCI-protected, 120 V, 20 A, grounded outlet.
Grab bars can also be installed directly to the module, providing the proper fastening device is selected to securely attach the bar to the unit. Manufacturer’s suggestions concerning grab bar installation must be carefully followed. Kohler Co., Kohler, WI 115982-2-...
Position the shower rod so the shower curtain hangs inside the bath. E. SHOWER DOOR INSTALLATION Shower doors for this unit are available from the Kohler Co. Contact your dealer for more information on shower door availability and installation. When shower doors are to be installed on this bath...
Insert the Flexjet into the housing, and lightly push and rotate the Flexjet until it snaps into position. Do not force the Flexjet. O-Ring (Must NOTE: When installed correctly, the Flexjet should turn Be Lubricated) smoothly both clockwise and counterclockwise. Kohler Co., Kohler, WI 115982-2-...
B. TROUBLESHOOT WHIRLPOOL SYSTEM This troubleshooting guide is for general aid only. A Kohler Authorized Service Representative or a qualified electrician should correct all electrical problems. For warranty service, contact your dealer or wholesale distributor. SYMPTOMS PROBABLE CAUSES RECOMMENDED ACTION 1.