Options Settings; Parental Lock - Pioneer DCS-575 Operating Instructions Manual

09 Initial Settings menu

Options settings

Setting

Parental Lock

DivX(R) VOD
Parental Lock
• Default level: Off; Default password: none;
Default Country/Area code: us (2119)
To give you some control over what your
children watch on your DVD player, some DVD-
Video discs feature a Parental Lock level. If your
player is set to a lower level than the disc, the
disc won't play.
Some discs also support the Country/Area
Code feature. The player does not play certain
scenes on these discs, depending on the
Country/Area Code you set.
Registering a new password
Register a password to change the Parental
Lock level or enter a Country/Area code.
1 Select 'Password'.
Initial Settings
Video Output
Language
Display
Options
2 Use the number buttons to input a four-
digit password then press ENTER.
Note
1 • Not all discs use Parental Lock, and will play without requiring the password.
• If you forget your password, you'll need to reset the player to register a new password (see Resetting the system on page 50).
32
En
Option
–
Display
Parental Lock Password
DivX (R) VOD Level Change
Country Code
What it means
See Parental Lock below.
®
See About DivX VOD content below.
Changing your password
To change your password, confirm your
existing password then enter a new one.
1 Select 'Password Change', input your
existing password, then press ENTER.
2 Enter a new password and press ENTER.
Setting/changing the Parental Lock
1 Select 'Level Change'.
2 Use number buttons to enter your
password, then press ENTER.
3 Select a new level and press ENTER.
• Press  repeatedly to lock more levels
(more discs will require the password);
1
press  to unlock levels. You can't lock
level 1.
Setting/changing the Country/Area code
You can find the Country/Area code list on
page 51.
1 Select 'Country Code', input your
password, then press ENTER.
2 Select a Country/Area code then press
ENTER.
There are two ways you can do this:
• Select by code letter: Use / to change
the Country/Area code.
• Select by code number: Press  then use
the number buttons to enter the four-digit
Country/Area code.
The new Country/Area code takes effect after
ejecting the disc once.