Casio Privia PX-5S User Manual page 16

Using Built-in Tones (Tutorial)
Display Text
Pan
Effect >Ent
DSP
On/Off
Common Effect >Ent
Pan >Ent
■ Editable Hex Layer Tone Parameters
Hex Layer tones have two types of editable parameters: parameters that affect a specific layer and parameters that
affect all layers.
• The six sliders ( 4 to
the setting items shown below (page E-8).
Editable Parameters that Affect a Specific Layer
1.
Select "Layer Edit >Ent" and then press the
2.
Use the dk (PART) minus (–) and plus (+) buttons to select the number of the layer you want to edit.
• When "ALL" (all layers) is selected as the layer number, an x-mark may be displayed on the left side of the display
showing the part being edited. This indicates that all of the layers do not have the same setting for the currently selected
parameter.
E-14
Pan. Specifies the stereo position of drum sound.
Effect. This is a group of editable effect function DSPs (page E-18).
em
Press the (ENTER) button to advance to the DSP editing screen.
• For details about the setting items below, see the melody tone
"Effect" on page E-12.
Chorus Send, Delay Send, Reverb Send
• Values produced by multiplying send values configured for
instrument-specific effects (Effect >Ent) and send values configured
for global effects (Common Effect >Ent) are batch sent to the system.
• When "DSP On/Off" is turned on (DSP applied), chorus, delay, and
reverb settings can be configured within "Common Effect >Ent"
below.
DSP on/off. Specifies whether or not DSP should be applied to tones.
Common effect. This is a group of editable effect function parameters.
For details, see the melody tone "Effect" on page E-12.
• For details about the setting items below, see the melody tone
"Effect" on page E-12.
Chorus Send, Delay Send, Reverb Send
Pan. This is a group of editable parameters associated with panning
(sound stereo position).
• For details about the setting items below, see the melody tone "Pan"
on page E-13.
Dynamic Panning, Pan Position
9 ) and four knobs ( 3 ) can be used for quick and easy adjustment of certain settings using
Description
em
(ENTER) button to enter the group.
layer number
Settings
–64 - 0 - +63
Off, On